A-A-52167 - Fiber Metal, Sheet, Nickel Base, Unbacked
A-A-52313 - Steel Sheets, Corrugated: 2-1/2 Inch Nominal Corrugation, Painted Or Unpainted
This commercial item description covers painted and unpainted corrugated steel sheets for roofing (type I) and siding (type II).
ISO3573 - Steel, Sheet, Hot-Rolled Carbon, Of Commercial And Drawing Qualities
This International Standard applies to hot-rolled carbon steel sheet of commercial and drawing qualities.
ISO3574 - Steel, Sheet, Cold-Reduced Carbon, Of Commercial And Drawing Qualities
This International Standard applies to cold-reduced carbon steel sheet of commercial and drawing qualities.
ISO3575 - Steel Sheet, Carbon, Continuous Hot-Dip Zinc-Coated, Of Commercial Lock Forming And Drawing Qualities
This International Standard applies to carbon steel sheet of commercial, lock-forming and drawing qualities coated by a continuous hot-dip zinc coating process.
ISO4960 - Steel Strip, Cold-Reduced Carbon, With A Carbon Content Over 0.25 %
This International Standard applies to cold-reduced carbon steel strip with a carbon content over 0.25 percent (m/m) made from steels specified in table 1.
ISO4995 - Steel Sheet, Hot-Rolled, Of Structural Quality
This International Standrd applies to hot-rolled steel sheet of structural quality in the grades and classes listed in tables 1 and 2, usually without the use of micro-alloying elements.
ISO4996 - Steel Sheet, Hot-Rolled, Of High Yield Stress Structural Quality
This International Standard applies to hot-rolled steel sheet of high yield stress structural quality in the grades and classes listed in tables 1 and 2, with the use of microalloying elements.
ISO4997 - Steel Sheet, Cold Reduced Of Structural Quality
This International Standard applies to cold-reduced steel sheet of structural quality in grades CR220, CR250, CR320, and CH550 in the classes included in table 1, usually without the use of microalloying elements.
ISO4998 - Steel Sheet, Carbon, Of Structural Quality, Continuous Hot-Dip Zinc-Coated
This International Standard applies to continuous hot-dip zinc coated carbon steel of structural quality in the grades listed in table 2.
ISO4999 - Steel Sheet, Carbon, Continuous Hot-Dip Terne (Lead Alloy) Coated Cold-Reduced, Of Commercial Drawings And Structural Qualities
This International Standard applies to cold-reduced carbon steel sheet of commercial and the drawing qualities coated by a continuous hot-dip terne (lead alloy) coating process.
ISO5000 - Steel Sheet, Continuous Hot-Dip Aluminium/Silicon-Coated Cold-Reduced Carbon, Of Commercial And Drawing Qualities
This International Standard specifies the characteristics of cold-reduced carbon steel sheet of commercial and drawing qualities coated by a continuous hot-dip aluminium -silicon alloy coating process.
ISO5001 - Steel Sheet, Cold Reduced Carbon For Vitreous Enamelling
This International Standard applies to cold-reduced carbon steel sheet of commercial and drawing qualities for vitreous enameling where surface of the sheet and chemical composition of the base metal are of prime importance.
ISO5002 - Steel Sheet, Hot-Rolled And Cold-Reduced Electrolytic Zinc-Coated Carbon,Of Commercial And Drawing Qualities
This International Standard specifies the characteristics of carbon steel sheet of commercial and drawing qualities in cut length or coil form, zinc coated by electrolytic deposition.
ISO5950 - Steel Sheet, Continuous Electrolytic Tin-Coated Cold-Reduced Carbon Of Commercial And Drawing Qualities
This International Standard applies to cold-reduced carbon steel sheet of commercial and drawing qualities coated in coil form by electro-deposition of tin.
ISO5951 - Steel Sheet, Hot-Rolled Of Higher Yield Strength With Improved Formability
This International Standard applies to hot-rolled steel sheet of higher yield strength with improved formability in the grades listed in table 1.
ISO5952 - Steel Sheet, Continuously Hot-Rolled Of Structural Quality With Improved Atmospheric Corrosion Resistance
This International Standard applies to continuously hot-rolled steel sheet (see 3.2) of structural quality having improved atmospheric corrosion resistance.
ISO5954 - Steel Sheet According To Hardness Requirements, Cold-Reduced Carbon
This International Standard applies to cold-reduced carbon steel sheet to hardness requirements. It is suitable for applications where surface is of prime importance.
ISO6316 - Steel Strip, Hot-Rolled, Of Structural Quality
This International Standard applies to hot-rolled steel strip of structural quality in the grades and classes listed in tables 1 and 2, usually without the use of microalloying elements.
ISO6317 - Steel Strip, Hot-Rolled Carbon, Of Commercial And Drawing Qualities
This International Standard applies to hot-rolled carbon steel strip of commercial and drawing qualities.
ISO6932 - Steel Strip, Cold Reduced Carbon, With A Maximum Carbon Content Of 0,,25 %
This International Standard applies to cold-reduced carbon steel strip with a maximum carbon content of 0.25%, furnished to two levels of closer tolerances than cold-reduced carbon steel sheet, with specific quality, specific hardness requirements or mechanical properties, specific edge and specific finish.
JAN-A-256 - Armor, Homogeneous, Rolled Steel, Aircraft Type (S/S By Mil-A-46099)
JAN-A-434 - Armor, Steel, Plate, Rolled Non-Magnetic (5/32 To 1 1/16 In. Incl.), Aircraft Type
JAN-S-1160 - Steel, Spring, Round Or Square (Including Rectangular Sections Having Thicknesses Greater Than Half Their Width) (Use Qq-W-428, Qq-W-470, Mil-W-21081, Mil-W-21425, Or Mil-S-46033 As Applicable)
MIL-A-13259 - Armor, Steel, Sheet, Strip And Fabricated Forms, Rolled, Non-Magnetic, For Helmets And Personnel Armor Requirements (S/S By Mil-Dtl-62474 And Mil-Dtl-44050)
MIL-A-46099 - Armor Plate, Steel, Roll-Bonded, Dnal Hardness (0.187 Inches To 0.700 Inches Inclusive
This specification covers roll-bonded, dual hardness, steel armor plate for lightweight armor applications (see 6.1).
MIL-A-46173 - Armor, Steel, Plate, Wrought, (Esr) (3/16 Through 3 Inches, Inclusive)
MIL-A-46186 - Armor Plate, Steel, Wrought, High-Strength, High-Quality
This specification covers materials requirements for quenched and tempered high-strength wrought steel armor plate for lightweight armor applications (up to 1/2 inch) (see 6.1 and 6.3).
MIL-A-47228 - Alloy, High Permeability
MIL-DTL-12560 - Armor Plate, Steel, Wrought, Homogeneous (For Use In Combat-Vehicles And For Ammunition Testing)
This specification covers wrought-steel homogeneous armor plate for ordered thicknesses from 0.098 inch (2.5 mm) up to an ordered thickness of 6.000 inches (152.4 mm), inclusive, for use in combat-vehicles and for ordered thicknesses from 0.250 inches (6.35 mm) up to an ordered thickness of 12.000 inches (304.8 mm), inclusive, for use in proof and acceptance testing of armor defeating ammunition (see 6.1, 6.2, and 6.3.3).
MIL-DTL-23196 - Steel Plate, Corrosion Resistant, Austenitic (Uns S30400, S30403, S31600, S34700, And S34800)
This specification covers austenitic corrosion resistant steel plate (UNS S30400, S30403, S31600, S34700 and S34800) 3/16 inch and over in thickness with special limitations on certain elements.
MIL-DTL-46100 - Armor Plate, Steel, Wrought, High-Hardness
This specification covers quenched and tempered high-hardness wrought steel armor plate for lightweight armor applications for ordered thicknesses from 0.118 inches (3 mm) up to an ordered thickness of 2.000 inches (50.8 mm), inclusive (see 6.1, 6.2, and 6.3).
MIL-DTL-46177 - Armor, Steel Plate And Sheet, Wrought, Homogeneous (1/8 To Less Than 1/4 Inch Thick)
This specification covers wrought-steel homogeneous plate and sheet from l/8 to less than l/4 inch inclusive in thickness (see 6.2).
MIL-F-20138 - Floor Plate, Corrosion Resistant Steel, Rolled
MIL-F-62453 - Fiber Metal, Sheet, Nickel Base, Unbacked (S/S By A-A-52167)
This specification covers one type of unbacked nickel base fiber metal material.
MIL-I-20144 - Iron, Wrought, Plates, Black
MIL-I-20149 - Iron, Wrought, Sheet, Black And Zinc Coated (Galvanized)
MIL-N-22840 - Nickel, Iron Alloy (50 Percent Nickel) Strip, Bar And Rod, For Magnetic Applications
MIL-P-13326 - Plate, Metal, Steel Alloy; Heat Treated, High Strength; For Welded Structures
This specification covers high strength, heat treated, alloy steel plate 2 inch or less in thickness for use in critically stressed welded structures.
MIL-P-18124 - Panel, Armor, Steel Encased Aggregate And Binder
MIL-P-47183 - Plate, Steel, Corrosion Resisting
MIL-S-11207 - Steel Sheets, Corrugated, 2-1/2-Inch Nominal Corrugations, Painted Or Unpainted (S/S By A-A-52313)
This specification covers painted or unpainted corrugated steel sheets.
MIL-S-11713 - Steel Strip, Carbon, Spring: For Mechanical Time Fuze Components
MIL-S-12875 - Sheet, Preforated, Metal
MIL-S-13812 - Steel Plate, Wrought, Homogeneous For Ammunition Testing (1/4 To 12 Inches Incl.) (S/S By Mil-A-12560)
MIL-S-16113 - Steel Plate, High Tensile (Ht), Hull & Structural (S/S By Mil-S-22698)
MIL-S-16197 - Steelsheet, Low-Carbon, Porcelain Enamel Coated
MIL-S-16216 - Steel Plate, Alloy, Structural, High Yield Strength (Hy-80 And Hy-100) (See Notice 2 For Replacement Information)
This specification covers grade HY-80 and grade HY-100, sheared or gas cut, alloy steel plates, intended primarily for use in critical applications where a notch-tough high-strength material is required.
MIL-S-16538 - Steel, Alloy, Forgings (For Special High Temperature Applications)
MIL-S-16997 - Steel, Sheet, Electrical (Use Ams 7711)
MIL-S-17919 - Steel Strip And Flat Bar, Carbon And Alloy (For Springs) (Navy)
MIL-S-17996 - Steel Sheet And Other Wrought Forms, Corrosion Resisting, Austenitic (Low Magnetic Permeability), Chromium-Manganese-Nickel (Refer To Qq-S-766)
MIL-S-18171 - Steel, Plate, Sheet, And Strip, Corrosion Resisting, Radioactive System Service
MIL-S-18728 - Steel Plate, Sheet, And Strip, Alloy, 8630, Aircraft Quality (S/S By Sae-Ams6350, Sae-Ams6351 Or Sae-Ams6345)
MIL-S-18729 - Steel Plate, Sheet, And Strip, Alloy, 4130, Aircraft Quality (S/S By Sae-Ams6350, Sae-Ams6351 Or Sae-Ams6345)
This specification covers chrome-molybdenum alloy 4130, steel sheet, strip, and plate of thickness to and including 1.50 inches.
MIL-S-18731 - Steel, Alloy, Sheet & Strip, (6150), Aircraft Quality (See Ams 6455)
MIL-S-18733 - Steel Plate, Sheet, & Strip, Alloy (4135), Aircraft Quality (See Ams 6352)
MIL-S-18957 - Steel Deck Plates, Dimpled, And Dimpled And Tie-Down Fitted
MIL-S-19315 - Steel Plate, Alloy, Structural And Protective Application
MIL-S-19795 - Steel Plate, Alloy, Structural, High Yield Strength, General Purpose
MIL-S-20143 - Steel, Sheet, For The Manufacture Of Metal Furniture (Use Qq-S-692)
MIL-S-20147 - Steel, Nickel, Plate
MIL-S-20154 - Steel, Plate, Special-Treatment, For Protective Hull Plating
MIL-S-21515 - Steel Bars, Plates, Sheets And Strips, 4335, Modified Vacuum Melted (Asg) (S/S By Sae-Ams6429)
MIL-S-22698 - Steel Plate, Shapes And Bars, Weldable Ordinary Strength And Higher Strength: Structural
This specification covers ordinary strength and higher strength steel plate, shapes and bars.
MIL-S-24094 - Steel Plate, High Tensile (Ht), Hull And Structural (Use Mil-S-16113)
MIL-S-24113 - Steel Plates, Carbon Mananese - Heat Treated By Normalizing Or Quenching And Tempering (S/S By Mil-S-22698)
MIL-S-24238 - Steel Plate Carbon And Low Alloy
This specification covers hot rolled carbon and low alloy steel plate, suitable for welding and intended for flanging or forming, or in formed or rolled shapes, including spun or dished heads and formed or rolled cylindrical shells.
MIL-S-24286 - Steel Armor Plate, Wrought, High Hardness (S/S By Mil-S-16216)
MIL-S-24371 - Steel Plate, Structural, High Yield Strength (Hy-130) (See Notice 2 For Replacement Information)
This specification covers HY-130 steel plate intended primarily for use in submarine hulls and other critical structural applications where a notch-tough, high-yield material is required.
MIL-S-24451 - Steel Heat Treated Heads, Alloy Structural, High Yield Strength (Hy-80 And Hy-100) (See Notice 2 For Replacement Information)
This specification covers HY-80 and HY-1000 heat treated heads. The requirements for HY-80 apply to thickness to 8 inches inclusive, and HY-100 to thickness up to 3 inches inclusive. Two piece heads consist of heads made from two flat plates welded together and then formed as one piece.
MIL-S-24645 - Steel Plate, Sheet, Or Coil, Age-Hardening Alloy, Structural, High Yield Strength (Hsla-80 And Hsla-100) (See Notice 2 For Replacement Information)
This specification covers 80,000 (HSLA-80) and 100,000 (HSLA-100) pounds per square inch (lb/in) high yield strength, age-hardening alloy steel plate, sheet, and coil intended primarily as replacements for steel grades HY-80 and HY-100, respectively, for approved uses in critical structural applications where notch-tough high-strength materials are required.
MIL-S-25043 - Steel Plate, Sheet, And Strip, 17-7 Ph, Corrosion Resistant, Precipitation Hardening (S/S By Sae-Ams5528 Or Sae-Ams5529)
MIL-S-3039 - Steel, Strap, High Carbon, Spheriodized Annealed (For Ammunition Cartridge Clips)
MIL-S-3289 - Steel, Plate And Disk, Carbon, Forging Quality
This specification covers one composition of forging quality carbon steel plate and disks, for steel cartridge cases for 20MM and larger ammunition.
MIL-S-4043 - Steel; Corrosion-Resisting (Extra Low Carbon Type 304), Plate, Sheet, And Strip (S/S By Sae-Ams5511)
MIL-S-4174 - Steel Sheet And Strip, Flat, Aluminum Coated Low Carbon (S/S By Sae-Ams5036 And Astm-A463)
This specification covers the requirements for cold rolled low carbon steel sheet and strip coated on both sides with a layer of aluminum using a hot-dipped coating process.
MIL-S-46044 - Steel, Expanded Sheet, Corrosion-Resisting
MIL-S-46049 - Strip, Metal, Carbon Steel, Cold Rolled, Hardened And Tempered Spring Quality
This specification covers cold rolled carbon steel of hardened and tempered spring quality in strip form for use in spring applications.
MIL-S-46055 - Steel, Sheet & Strip, Low Carbon Chromized (S/S By Astm-A167And Astm- A176)
MIL-S-46084 - Steel, Silicon, Sheet And Strip, Electrical
MIL-S-46188 - Steel Plate, Wrought, Homogeneous Electroslag Remelt (Esr) (4340 Alloy
MIL-S-46850 - Steel: Bar, Plate, Sheet, Strip, Forgings, And Extrusions, 18 Percent Nickel Alloy, Maraging, 200 Ksi, 250 Ksi, 300 Ksi, And 350 Ksi, High Quality
This specification covers steel bars, plate, sheet, strip, forgings and extrusions containing 18 percent nickel and capable of attaining high ultimate tensile properties by means of a relatively low temperature heat treating process.
MIL-S-47038 - Steel, Carbon, High Strength Low Alloy, Precipitation Hardening
MIL-S-47263 - Steel, Alloy, Type D6Ac (Modified)
MIL-S-47264 - Steel, Alloy, Type D-6A
MIL-S-47319 - Steel, Bar, Billet And Forgings Cobalt-Free Maraging
This specification defines the requirements of two classes of one type of steel bar, forgings and stock for forging, cobalt-free maraging, containing 18 percent nickel and capable of attaining high ultimate tensile properties by means of a relatively low temperature heat treating process.
MIL-S-48403 - Steel Sheet, Hot-Dip, Zinc-Coated (Galvanized), Minimized Spangle, For Automotive Vehicle Body Use
This specification covers hot-dipped galvanized steel sheet of minimized spangle (minimal size of zinc crystals in the coating) manufactured in coils and cut lengths from continuous production lines.
MIL-S-5059 - Steel, Corrosion Resistant (18-8) Plate, Sheet And Strip (S/S By Sae-Ams5513, Sae-Ams5910 Thru 5913, Sae-Ams5524, Sae-Ams5516 Thru 5519, Sae-Ams5901 Thru 5907)
This specification covers the requirements for four types and five conditions of aircraft quality corrosion-resistant (18-8) steel plate, sheet and strip.
MIL-S-645 - Strip Metal, Carbon Steel, Cold Rolled, Drawing Quality, Special Killed (For Ammunition Components)
MIL-S-81506 - Steel Plate, Sheet, & Strip, 17 4Ph, Corrosion Resistant, Precipitation Hardening (S/S By Sae-Ams5604)
MIL-S-854 - Steel, Corrosion-Resisting, Plates, Sheets, Strips (3 As Applicable)
MIL-S-871 - Steel Plate, Carbon-Molybdenum Alloy And Manganese-Molybdenum Alloy, Hot Rolled (Na
MIL-S-8840 - Steel Sheet And Strip, Corrosion-Resistant, Precipitation Hardening (Am350 And Am355), Premium Quality (S/S By Sae-Ams-S-8840)
MIL-S-8949 - Steel Bars, Plates, Sheets, Billets, And Reforging Stock Type D6Ac (Users May Refer To Sae-Ams-S-8949 As A Possible Replacement)
This specification establishes the requirements for procuring vacuum melted Cr-Mo-V-Ni, type D6AC steel forged billets, reforging stock, bars, rods, plate, sheet, and strip.
MIL-S-8955 - Steel Plate, Sheet And Strip, Ph 15-7 Mo Corrosion-Resistant, Precipitation Hardening (S/S By Sae-Ams5520)
MS14445 - ( Images) Plate, Metal, Corrosion Resistant, Type 302
MS14446 - ( Images) Plate, Metal, Corrosion Resistant, Type 304
MS14447 - ( Images) Plate, Metal, Corrosion Resistant, Type 304L
MS14448 - ( Images) Plate, Metal, Corrosion Resistant, Type 310
MS14449 - ( Images) Plate, Metal, Corrosion Resistant, Type 316
MS14450 - ( Images) Plate, Metal, Corrosion Resistant, Type 316L
MS14451 - ( Images) Plate, Metal, Corrosion Resistant, Type 321
MS14452 - ( Images) Plate, Metal, Corrosion Resistant, Type 347
MS14453 - ( Images) Plate, Metal, Corrosion Resistant, Type 410
MS14454 - ( Images) Plate, Metal, Corrosion Resistant, Type 430
MS14455 - ( Images) Sheet, Metal Corrosion Resistant, Type 301
MS14456 - ( Images) Sheet, Metal Corrosion Resistant, Type 302
MS14457 - ( Images) Sheet, Metal, Corrosion Resistant, Type 304
MS14458 - ( Images) Sheet, Metal, Corrosion Resistant, Type 309
MS14459 - ( Images) Sheet, Metal, Corrosion Resistant, Type 310
MS14460 - ( Images) Sheet, Metal, Corrosion Resistant, Type 316
MS14461 - ( Images) Sheet, Metal, Corrosion Resistant, Type 316L
MS14462 - ( Images) Sheet, Metal, Corrosion Resistant, Type 321
MS14463 - ( Images) Sheet, Metal, Corrosion Resistant, Type 347
MS14464 - ( Images) Sheet, Metal, Corrosion Resistant, Type 410
MS14465 - ( Images) Sheet, Metal, Corrosion Resistant, Type 430
MS14466 - ( Images) Strip, Metal, Corrosion Resistant, Type 302
MS14467 - ( Images) Strip, Metal, Corrosion Resistant, Type 304
MS14468 - ( Images) Strip, Metal, Corrosion Resistant, Type 316
MS14501 - ( Images) Foil, Metal, Corrosion Resistant, Type 301
MS14502 - ( Images) Foil, Metal, Corrosion Resistant, Type 302
MS14503 - ( Images) Plate, Steel, Corrosion Resistant, Type 301
MS14504 - ( Images) Plate, Steel, Corrosion Resistant, Type 302
MS14505 - ( Images) Plate, Steel, Corrosion Resistant, Type 304
MS14506 - ( Images) Sheet, Metal, Corrosion Resistant, Type 301
MS14507 - ( Images) Sheet, Metal, Corrosion Resistant, Type 302
MS14508 - ( Images) Sheet, Metal, Corrosion Resistant, Type 304
MS14509 - ( Images) Sheet, Metal, Corrosion Resistant, Type 316
MS14510 - ( Images) Strip, Metal, Corrosion Resistant, Type 301
MS14511 - ( Images) Strip, Metal, Corrosion Resistant, Type 302
MS14512 - ( Images) Strip, Metal, Corrosion Resistant, Type 304 (Aerospace)
MS14513 - ( Images) Strip, Metal, Corrosion Resistant, Type 316 (Aerospace)
MS14514 - ( Images) Sheet, Perforated, Metal, Straight, Corrosion Resistant, Type 304 (Aerospace)
MS14515 - ( Images) Sheet, Perforated, Metal, Staggered 60 Deg., Corrosion Resistant, Type 301 (Aerospace)
MS15158 - Tee Joint Specimen (Coupon) For Thermal Shock Test
MS33520 - Tolerance, Corrosion Resistant Steel Plate, Sheet And Strip (Use Fed Std 48)
MS33564 - Standard Lengths And Widths, Metal Sheets And Strips
MS52038 - ( Images) Strip, Metal, Low Carbon Steel (1010) Cold Rolled
MS52039 - ( Images) Strip, Metal, Low Carbon Steel (1015) Cold And Hot Rolled
MS52040 - ( Images) Strip, Metal, Low Carbon Steel (1018) Cold Rolled
MS52041 - ( Images) Strip, Metal, Low Carbon Steel (1020) Cold Rolled
MS52042 - ( Images) Sheet, Metal, Low Carbon Steel (1010) Cold And Hot Rolled
MS52043 - ( Images) Sheet, Metal, Low Carbon Steel (1015) Cold And Hot Rolled
MS52044 - ( Images) Sheet, Metal, Low Carbon Steel (1018) Cold And Hot Rolled
MS52088 - ( Images) Plate, Tool Steel, Type 01
MS90504 - ( Images) Plate, Steel, Carbon, Medium
MS90505 - ( Images) Sheet, Steel, Carbon, Medium
QQ-F-455 - Floor Plate, Steel, Rolled (Modular, For Concrete Floors) (Use Tt-C-535)
QQ-F-461 - Floor Plate, Steel, Rolled (S/S By Astm A786)
QQ-I-716 - Iron And Steel, Sheet, Zinc-Coated (Galvanized) (S/S By Qq-S-775)
QQ-S-00629 - Steel, Alloy; Tubing Mechanical, Round: Seamless And Welded (S/S By Oo-T-00825)
QQ-S-00640 - Steel, Carbon: Sheet And Strip (S/S By Qq-S-698, Qq-S-700, Qq-S-777, And Mil-S-46049)
QQ-S-00695 - Steel, Sheet, For Manufacture Of Metal Furniture (S/S By Qq-S-692)
QQ-S-626 - Steel Plate, Alloy (Structural Quality) (S/S By Astm-A829)
QQ-S-627 - Steel Alloy, Sheet And Strip, Hot-Rolled (Use Astm A505, A506 And A507)
This specification covers hot-rolled alloy-steel sheet and strip used for general fabrication purposes.
QQ-S-635 - Steel Plate, Carbon (S/S By Astm-A827)
This specification covers forging quality, flat-rolled carbon steel plate for use in the heat-treated or non heat-treated condition.
QQ-S-636 - Steel, Carbon (Low-Carbon), Sheets And Strips (S/S By Qq-S-698)
QQ-S-682 - Steel, Corrosion-Resisting-Clad Plates, Sheets, And Strips (Use Astm-A263, A264, A265)
QQ-S-691 - ( Images) Steel Plate, Carbon Silicon, Carbon Molybdenum And Manganese Molybdenum Alloys Hot Rolled, (Marine Boiler Quality) (Use Astm A515, A516, A204, A306)
This specification covers steel plates of marine boiler quality, for use at temperatures not over 800degrees F. for carbon steel and 875 degrees F. for the alloy grades for marine boilers and other pressure vessels where fusion welding, flanging or forming is required: for boiler shells, drums, headers, baffles, supporting plates, and similar applications.
QQ-S-692 - Steel, Sheets, Carbon, Cold-Rolled (S/S By Qq-S-698, Qq-S-700, Qq-S-777)
QQ-S-693 - Steel, Sheet, Carbon, Hot-Rolled (S/S By Qq-S-698, Qq-S-700, Qq-S-777)
QQ-S-698 - Steel, Sheet And Strip, Low Carbon
This specification covers low-carbon sheet and strip steel for general fabrication application.
QQ-S-699 - Steel Sheets, Carbon, Hot-Rolled Heavy Gage Structual Quality
This specification covers hot-rolled carbon-steel sheets 0.0449 inch and thicker in cut lengths or coils, intended for structural purposes where mechanical test values are required.
QQ-S-700 - Steel Sheet And Strip, Medium And High Carbon (S/S By Sae-Ams-Qq-S-700)
QQ-S-701 - Steel, Staybolt (Boiler)
QQ-S-731 - Steel, Structural, For Cars (No S/S Documents)
QQ-S-751 - Steel, Structural (Including Steel For Cold Flanging) And Steel, Rivet, For Ships Other Than Naval Vessels
QQ-S-766 - Steel, Stainless And Heat Resisting, Alloys, Plate, Sheet And Strip (S/S By Astm-A240, Astm-A666, And Astm-A693)
QQ-S-775 - Steel Sheets, Carbon, Zinc-Coated (Galvanized) By The Hot-Dipped Process (S/S By Astm-A526, Astm-A527, Astm-A528, Astm-A642, Astm-A361 And Astm-A444)
This specification covers steel sheet in coils or cut lengths, zinc-coated (galvanized) on continuous lines by the hot-dip process.
QQ-S-775 - Steel Sheets, Carbon, Zinc-Coated (Galvanized) By The Hot-Dip Process (S/S By Astm-A526, Astm-A527, Astm-A528, Astm-A642, Astm-A444 And Astm-A361)
QQ-S-777 - Steel, Carbon, Strip, Cold Rolled, Untempered Spring Quality (S/S By Astm-A682/A682M And Astm-A684/A684M)
This specification covers cold-rolled carbon steel strip of untempered spring steel quality.
QQ-T-181 - Terne Plates (For Manufacturing Purposes) (Use Qq-T-191)
QQ-T-191 - Terne Sheet (Long And Short Terne)
QQ-T-201 - Terneplate, For Roofing And Roofing Products
This specification covers type I carbon steel base metal and type II stainless steel base metal coated with a lead-tin alloy for roofing materials.
QQ-T-425 - Tinplate (Electrolytic) (S/S By Astm-A623, Astm-A623M, Astm-A624, Astm-A624M, Astm-A626, Astm-A626M And Astm-A630)
This specification covers electrolytic tinplate produced from low carbon cold-reduced steel. Normally tinplate is furnished in one grade comprised of a mixture of unassorted primes and seconds.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business