MIL-DTL-46100E (MR)
each plate shall be such that mill scale or oxidation product shall not interfere with
determination of acceptability. Imperfections listed above, which are of such a nature as to
affect the fabrication of the materials, shall be rejected.
TABLE IV. Thickness tolerances for ordered thickness 1/, inches (over and under) 2/.
Tolerances over and under ordered thickness for widths given,
inches
96 to
108 to 120 to
132 to
Specified
to 72
72 to
84 to
108
120
132
144
Thickness,
excl.
84 excl. 96 excl.
excl.
excl.
excl.
incl.
inches
0.1180
0.016
0.016
0.019
0.019
0.023
---
---
0.1250
0.016
0.016
0.019
0.019
0.023
---
---
0.1875
0.016
0.016
0.019
0.019
0.023
---
---
0.2500
0.016
0.016
0.019
0.019
0.023
---
---
0.3125
0.016
0.019
0.019
0.019
0.023
0.026
---
0.3750
0.016
0.019
0.019
0.023
0.023
0.026
---
0.4375
0.016
0.019
0.019
0.023
0.026
0.026
0.031
0.5000
0.016
0.019
0.019
0.023
0.026
0.026
0.031
0.5625
0.019
0.019
0.019
0.023
0.026
0.031
0.031
0.6250
0.019
0.019
0.019
0.023
0.026
0.031
0.031
0.6875
0.019
0.019
0.019
0.023
0.026
0.031
0.031
0.7500
0.019
0.019
0.023
0.023
0.026
0.031
0.039
0.8125
0.023
0.023
0.023
0.026
0.031
0.031
0.039
0.8750
0.023
0.023
0.026
0.026
0.031
0.031
0.039
0.9375
0.023
0.023
0.026
0.026
0.031
0.036
0.043
1.0000
0.026
0.026
0.026
0.026
0.031
0.036
0.043
1.0625
0.026
0.026
0.026
0.031
0.031
0.036
0.043
1.1250
0.026
0.026
0.026
0.031
0.031
0.039
0.043
1.1875
0.031
0.031
0.031
0.031
0.036
0.043
0.048
1.2500
0.031
0.031
0.031
0.036
0.036
0.043
0.048
1.3125
0.031
0.031
0.031
0.036
0.036
0.043
0.053
1.3750
0.031
0.031
0.031
0.036
0.039
0.048
0.053
1.4375
0.036
0.036
0.036
0.036
0.043
0.048
0.058
1.5000
0.036
0.036
0.036
0.039
0.043
0.048
0.058
1.5625
0.036
0.036
0.036
0.039
0.043
0.058
0.058
1.6250
0.036
0.036
0.036
0.043
0.048
0.058
0.063
1.6875
0.039
0.039
0.039
0.043
0.048
0.058
0.063
1.7500
0.039
0.039
0.039
0.043
0.048
0.058
0.068
1.8125
0.043
0.043
0.043
0.048
0.053
0.058
0.068
1.8750
0.043
0.043
0.043
0.048
0.053
0.063
0.068
1.9375
0.043
0.043
0.043
0.048
0.053
0.063
0.076
2.0000
0.043
0.043
0.043
0.048
0.053
0.063
0.076
1/
For intermediate thickness, the tolerance of the closer specified gage shall apply. In case of mid-point, the
tolerance for lower gage or interpolated value shall apply.
2/
When plates under 60 inches are rolled double width, the equivalent wider plate tolerance shall apply.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business